Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал:
http://dspace.onu.edu.ua:8080/handle/123456789/8657
Назва: | Экспериментальное определение модуля Юнга полимерных материалов |
Інші назви: | Експериментальне визначення модуля Юнга полімерных матеріалів Experiment al dete rmination of Jung module for polymer mate rials |
Автори: | Савин, Сергей Николаевич Савін, Сергій Миколайович Savin, S. N. |
Бібліографічний опис: | Вісник Одеського національного університету = Odesa National University Herald |
Дата публікації: | 2016 |
Видавництво: | Одеський національний університет імені І. І. Мечникова |
Ключові слова: | метод конечных элементов изгиб модуль Юнга метод кінцевих елементів згин the finite elements method curved Jung module |
Серія/номер: | ;Т. 21, Вип. 1(57), С. 72-79. |
Короткий огляд (реферат): | Разработана методика расчётно-экспериментального определения модуля Юнга для полимерных материалов. Предложено решение задачи расчета деформаций и напряжений в нагруженной консольной пластине методом конечных элементов. Розроблено методику розрахунково-експериментального визначення модуля Юнга для полімерних матеріалів. Запропоновано рішення задачі розрахунку деформацій та напруг щодо консольної пластини під навантаженням методом кінцевих елементів. In the article the method of calculation-experimental determination of the Jung module is offered for standards from materials of different types in form plates long from 40 to 200 mm, width from 5 to 50 mm and in thick 0,5 to 20 mm. For measuring the experimental setting, consisting of hard steel frame was used, set of loads to 4 kg and horizontal microscope.Solution of task of calculation of deformations and tensions in the loaded cantilever plate the finite elements method is offered. For verification of exactness of measurings standards were used from pure metals: aluminium, zinc, copper, and, also, polymethylmethacrylate. For all control standards the certain is experimental value of the Jung module at the small and middle loadings exactly corresponds reference data. For the estimation of influence of contents of powder phisico-mechanical properties of polymeric composites the values of the module were certain Jung module for an epoxypolymers and epoxycomposites with a 50% filling with powder of nickel. It is rotined that conduct 50% metallic contents promotes inflexibility of material more than in 2 times. The offered method does not require the strict sizes of standards, that comfortably for determination of the Jung module of experimental materials, above all things oriented polymeric composites. |
Опис: | Вісник Одеського нац. університету: сер.: Хімія : науковий журнал / ОНУ ім. І.І. Мечникова . – Одеса : ОНУ ім. І.І. Мечникова, 2016 |
URI (Уніфікований ідентифікатор ресурсу): | http://dspace.onu.edu.ua:8080/handle/123456789/8657 |
Розташовується у зібраннях: | Вісник Одеського національного університету. Хімія |
Файли цього матеріалу:
Файл | Опис | Розмір | Формат | |
---|---|---|---|---|
72-79.pdf | 280.35 kB | Adobe PDF | Переглянути/Відкрити |
Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.